Blue Screen of Death (BSOD) is a common name for the screen that appears after a fatal error occurs and the computer cannot continue to be used. You will need. Restart. These screens usually contain information about why they happened and usually display error messages or codes to help you investigate and fix the problem.

However, the real problem occurs when these BSODs occur frequently and the computer cannot be used properly. Even more so, you may try to fix the problem manually. Let’s see what the next BSOD is!

Contents

CLOCK_WATCHDOG_TIMEOUT Blue Screen of Death

This particular error message freezes the system and requires a complete reboot for the PC to work again. BSOD could be a bit less intimidating and user-friendly on Windows 10, but it’s still serious.

All Users working on some important files and documents can lose them forever, as there is a risk that all the files that were running when the error occurred will be corrupted.

CLOCK WATCHDOG TIMEOUT

However, there are several ways to solve this problem, but all try and follow the instructions carefully.

Also Read:

  1. System Service Exception
  2. Err_Connection_Timed_Out
  3. PAGE FAULT IN NONPAGED AREA

Method 1: Stop CPU Overclocking

CPU overclocking usually results in these errors. First of all, you need to know that CLOCL_WATCHDOG_TIMEOUT BSOD is usually caused by a processor problem. You need to confirm this.

Overclocking is the process of changing the processor frequency and speed to higher than factory settings. This will greatly increase the speed of your PC, but you should be absolutely careful as it can burn your entire PC due to overclocking or the carelessness of the user.

Resetting the CPU rate and frequency to its original state depends on the Software that was initially overclocked. Intel and AMD have their own downloadable applications that allow users to overclock the CPU, but there are dozens of programs to choose from. Stop PC overclocking and check if BSOD occurs again.

Method 2: Use The Windows Driver Verifier Tool

Driver Verifier uses malicious. Function calls or other techniques that can corrupt system files for Windows kernel mode drivers and graphics drivers. If you are a tool built into the Windows operating system.

Diagnose. This method detects all unsigned drivers not provided by Microsoft and attempts to validate or remove them.

Step 1: Go to the Windows menu and type Verifier to open the utility as an administrator. Open Verifier as an administrator. Select the option for which you want to create a default setting and click Next.

Step 2: Select Create Default Settings. Select the Automatically select unsigned driver option and click Next. A message is displayed stating that no unsigned driver was found.

Step 3: Automatically select unsigned driver Create a default and click Next. Select a driver from the list and click NextSelect a driver name from the list Select all drivers to show the vendor as unknown and click Finish Select all the drivers to show the provider as unknown

You will be prompted to restart your computer. After rebooting, reopen Driver Verifier, select the Remove existing settings option, and click Finish. Checker erases existing settings. Restart your computer now.

Method 3: Check Your Hard Drive

This way, use the command prompt to hard Detects and corrects logical file system errors on the drive. Use the CHDSK command. This works depending on the type of file system partition.

Try to fix both logical errors and recover all readable information that may be corrupted due to bad sectors on your hard drive. This process can take a few minutes to an hour.

Step 1: Open a command prompt as an administrator. Enter the command chkdsk / f / r E. (Replace E with the drive letter you want to troubleshoot.) Run chkdsk from command prompt.

Step 2: If the Volume is currently being used by another program, restart the computer after this operation is complete. When you restart your computer, the error will be checked.

Step 4: Use Windows Memory Diagnostics

Clock Watchdog Timeout mistakes additionally takes place while there may be incompatible Random Access Memory at the PC. Windows 10 has a software referred to as Windows Memory diagnostics which scans the RAM to discover viable mistakes.

Windows reminiscence diagnostics run after rebooting the gadget and can take numerous mins to finish the process.

Go to the Start Menu and Type in Windows Memory Diagnostics and open the program. Run Windows Memory Diagnostics. Choose the choice restart now and the pc will robotically take a look at for troubles while the pc restarts.

Step 5: Fix Outdated External Devices and Drivers

This might be the maximum not unusual place trouble to all BSOD troubles. Outdated drivers and incorrectly configured outside gadgets inclusive of a mouse, keyboard, webcam, and printer can reason gadget instability very quickly and it`s no surprise that those mistakes simply hold on going on each couple of hours or maybe mins.

Step 1: This may be constant without problems in case you are inclined to make investments a few time. Open Device Manager through trying to find it within side the Search bar which you could get right of entry to within side the Start menu. Click on View and allow the choice referred to as “Show hidden gadgets”.

Step 2: After that, test the tool supervisor for gadgets displaying an mistakes message subsequent to their call. Expand all menus through clicking at the arrow subsequent to their call and retain your search. In 90% percentage of all BSODs resulting from hardware, the problem is within side the Universal Serial Bus controllers with an mistakes of their call saying:

Unknown USB Device (Device Descriptor Request Failed)

Step 3: Keep your PC grew to become off and your Device Manager opened and eliminate USB gadgets one at a time (mouse, keyboard, webcam, etc.).When you eliminate the hardware thing that brought on the BSOD, this specific mistakes Unknown USB Device need to disappear.

Step 4: If it doesn`t, reconnect all gadgets, uncheck the “Show hidden gadgets” alternative from the View menu, and take a look at to peer if the Unknown USB Device is displaying. If it is, disconnect gadgets one at a time till it disappears. If you’ve got been following the commands successfully, you need to have found out simply which of your outside gadgets is inflicting the BSOD.

Step 5: Make positive the hidden gadgets are displaying. Keep the complicated tool disconnected, discover it within side the Universal Serial Bus controller, proper-click on it and choose Uninstall tool. Restart your pc and take a look at to peer if the problem has been resolved.

As for the bothered tool goes, you need to be capable of reinstall the up to date motive force for it actually through googling the call of your tool and downloading it from the manufacturer`s website.

Step 6: Switching Your Sounds to External Speakers

If you’re the use of a computer or a pc with pairs of audio system (inner and outside ones), this trouble may also arise while Windows attempts to change among the inner and outside audio system.

This may be constant without problems however you may not be capable of use your inner audio system after disconnecting the alternative pair.

Step 1: Right-click on at the Volume icon at the lowest proper a part of your taskbar and choose Playback gadgets. Sound settings need to open so ensure you live within side the Playback tab.

Step 2: Right-click on at the pair of audio system you want to disable and click on Disable. Make positive your different speaker is operating nicely as you won`t be capable of play sound if each of them begin malfunctioning. Restart your pc and take a look at to peer if the problem nevertheless appears.

Step 7: Use System File Checker

In this method, we can use Windows File Checker as a System Utility to restoration the broken or corrupt Windows documents within side the System. It is a integrated function in all cutting-edge variations of Windows Operating System.

It lets in you to restoration the broken or corrupt Windows documents within side the System. In order to run SFC, you want to run cod with accelerated mode (with administrator privileges).

Step 1: In the hunt menu kind cod and open command spark off as administrator. In the Command Prompt Window kind, sfc /scan now and press input to execute the command

Run sfc scan now.

Step 2: The System File Checker will begin strolling to test the integrity of all of the gadget documents and could restore the corrupt .dell documents if discovered. Once the SFC has completed scanning the gadget it’ll show one of the following messages:

Windows did now no longer discover any integrity violations

Windows Resource Protection discovered corrupt documents and repaired them

Windows Resource Protection discovered corrupt documents however turned into not able to restoration a few (or all) of them (now no longer a very good thing)If you notice the primary or 2d message then meaning there had been both no corrupt documents discovered at the gadget or if there had been any corrupt documents then they had been constant.

Step 8: Update BIOS

A pc`s Basic Input-Output System (BIOS) is embedded software program on a motherboard. It is the primary software program your PC masses in order that it is able to use such things as CD drives, mice, and keyboards nearly from the instant you switch it on.

Step 1: Updating BIOS permit you to address sure troubles concerning BSOD as any instability concerning BIOS settings will save you your PC from strolling or functioning normally. Take a have a take a observe the commands below!

Step 2: Find out the modern model of BIOS you’ve got mounted for your pc through typing misinform within side the Search bar within side the Start menu, Locate the BIOS model simply beneath your Processor version and duplicate or rewrite whatever to a textual content document or a chunk of paper.

Step 3: Find out whether or not your pc turned into bundled, pre-built, or assembled manually through buying all additives individually. This is crucial due to the fact you don`t need to apply BIOS made for one thing of your PC while it won`t follow for your different gadgets and you’ll overwrite BIOS with the incorrect one, main to predominant mistakes and gadget troubles.

Prepare your pc for the update. When updating your laptop, make sure the battery is fully charged and plug it in just in case. When updating your computer, we recommend that you use an uninterruptible power supply (UPS) to prevent the computer from turning off due to a power outage during the update.

Follow the steps provided for different desktop and laptop manufacturers. B. Lenovo BIOS update, Gateway BIOS update, HP BIOS update, Dell BIOS update, and MSI BIOS update.

Step 9: Check If The CPU Is Faulty

If the CPU is defective and has a bug in itself, it may be time to replace the CPU. This can be an expensive purchase, but it’s worth it if you want to stabilize your computer.

Have a professional IT expert check the CPU and remove the CPU if something goes wrong. If so, listen to suggestions on which model is best for your setup.

Step 10: Providing a Kernel Dump To IT Professionals

Kernel dumps can be read by IT professionals using the Windows Debugger. This debugger instantly shows where the problem is and how to fix it. The tool can be easily run using the command prompt.

Step 1: Search for a command prompt in the search bar, right-click and select Run as administrator to open a command prompt. Copy and paste the following command into the command prompt and be sure to click Enter. Verifier.exe / standard / all

Step 2: This process triggers a blue screen and logs the log files in the C: \ Windows \ Minimums \ folder. Opening this file can be a bit tricky, but there are Microsoft tools available for free download from this website. You can find it under Get Debugging Tools for Windows (WinDbg) (from SDK) in the Debugging Tools for Windows (WinDbg) section.

Step 3: After downloading the SDK file, if you do not want to use any other components, use the installation wizard to disable everything except the debugging tools for Windows. After installation, find the tool with the name windbag and run it. Go to File> Open Crash Dump and find the minimum file in the C: \ Windows \ Minimum \ folder.

Step 4: At the end of the resulting file, see the line “Probably the cause”. This is a good indicator of which driver is causing the problem. Right-click on this driver and select Uninstall Device to uninstall it from Device Manager. Make sure this device is disconnected in advance. You don’t have to download and install it yourself, so if you want to save time, you can also select the Update Driver button to update.

 Step 11: Reset The BIOS To The Default

If your BIOS is already up-to-date, or if you’re worried that something goes wrong during the installation process and your PC will stay bricked, reset the BIOS settings to the defaults and You can expect the optimum condition.

Step 1: Restart your computer and click F8 key to enter the BIOS. It doesn’t have to be the F8 key in all cases, but click the message button (the button that lists the PC manufacturer’s logo and name) at the bottom of the Start screen.

Press __ to run the setup.

Step 2: BIOS settings are not the same for all manufacturers, but you cannot use a mouse in the BIOS, so make sure you are familiar with the controls. The first way is to find the Default Settings button at the bottom of the BIOS screen.

This is usually the F9 key. Press it and select Enter. If it is not listed, go to the BIOS Exit tab and select the Load Setup Defaults option. Click Enter when prompted. Go to the Finish Saving Changes option so that you can start your computer. Check if the BSOD recurs.

 Step 12: Uninstall Virtual Image Manager

Programs such as Daemon Tools and Alcohol 120% are typically used to create virtual drives and images, manage ISO files, and more.

However, most of these tools are associated with this particular blue screen, so it’s a good idea to install them for now or replace one with another (for example, Daemon Tools with Alcohol 120). Replace with%).

Click the gear icon on the Start menu to open the Settings app. Open the Apps section, find the program you want to uninstall, and click Uninstall. Follow the instructions on the screen to run the uninstall wizard.

Also Read:

  1. 0x80080005
  2. System Interrupts High CPU
  3. Discord Stuck on Connecting

Step 13: Prevent Your PC From Overheating

Overheating is a major cause of system instability, crashes and freezes. This is especially true if you overuse your laptop with a weak cooling system in a warm room, especially when you are running a video game or other resource-intensive process.

The easiest thing you can do to keep your computer cool is to give it air to breathe by removing all obstacles to the air flow. There is one on the top of the CPU, one on the power supply, and usually one or more fans on the front and / or back of the case.

Unless you have already replaced the CPU fan, the fan on your computer may be a low-end fan that cools enough to make the processor work properly, assuming it is running at full speed. There is. Replace with a powerful replacement.

Stop overclocking your PC if it causes your computer to overheat. See Solution 1 for more information. On high-end computers, heat build-up can be an issue and even the fastest and most efficient fans may not be able to cool the PC. In such cases, installing a water cooling kit will help.