Standard slime recipes call for an activator like Borax; however, if your slime has become rubbery, dry, sticky, or stringy, you can cure it by adding particular items. To avoid skin irritation or concerns about the slime’s safety around children, choose a slime recipe that doesn’t call for Borax.
In place of Borax, alternative activators are used in these recipes. Instead of using a Borax activator to make typical slime, try generating fluffy slime using cornstarch, or stretchy slime with baking soda and contact lens solution. Now let’s find out how to make slime without activator.
Contents
Use Baking Soda Instead of Activator
Four pinches (approximately 1/2 tsp) of pure baking soda and three tablespoons of multi-purpose contact lens solution form a simple and powerful baking soda slime activator. This quantity is ideal for a 4-6 ounce glue bottle.
In addition, baking soda can be used to salvage failed slime experiments. It’s not uncommon for slime to be too watery and fall apart when you try to crush and knead it. If you want your slime to be more substantial, baking soda is a great ingredient to use.
Add a little more baking soda if your slime is still too runny. Add a little baking soda at a time until the slime reaches the desired consistency. Add warm water, a teaspoon at a time, if it is too firm.
Some people prefer their slime to be more solid and elastic, while others like it to be more gooey and drippy. You may fine-tune your slime recipes with the aid of baking soda.
How to Make Slime Without Activator
So, after trying various alternatives, I’ve settled on three recipes that don’t call for borax. The first two recipes make what is known as “fluffy” slime, which is light and almost dough-like in texture. The final type is a classic slime with a lot of elasticity.
Basic Fluffy Slime Recipe
This is a flexible formula for making fluffy slime in a wide range of textures and colors. To make a slime that is more elastic, add more water; to make popping slime, add fragments of polystyrene beads; to make unicorn slime, add glitter. You can use any kind of shampoo — the thicker, the better — and cornstarch to form the slime. The recipe is as follows:
Step 1: Combine the cornstarch and half the bottle of shampoo in a bowl.
Step 2: Toss everything together.
Step 3: If you want to tint it, add 3 drops of food coloring.
Step 4: To this, whisk in a tablespoon of water. Add the remaining 5 tablespoons of water gradually while stirring thoroughly between additions.
Step 5: The sludge needs to be kneaded for around 5 minutes.
If, after some kneading, your slime is still too sticky, add more cornstarch and continue working it in until you achieve the desired consistency. A coworker of mine discovered that he needed 2 1/4 cups of cornstarch to produce the dough-like consistency of a good fluffy slime, however I found that just 1/4 cup worked wonderfully both times I attempted it.
Based on my observations, the amount of cornstarch used can vary widely depending on factors like brand and humidity. You know you followed the instructions correctly if you have a semi-hard, semi-stretchy, wet, light, almost dough-like slime. The following dish is very similar in texture.
Fluffy Volcano Slime Recipe
Because of its response to heat, this goo is commonly referred to as volcano slime. After preparation, it can be heated in the microwave for 20 seconds to attain a molten, lava-like consistency. It will return to its fluffy slime form as it cools. To make fluffy volcanic slime, you need only white school glue and cornstarch. The recipe is as follows:
Step 1: Combine half a cup of cornstarch with a quarter of a cup of white school glue in a bowl.
Step 2: If you want to tint it, add 3 drops of food coloring.
Step 3: Harmonize the flavors.
Step 4: Spend at least 10 minutes working the dough by hand.
Step 5: You should heat it for 20 seconds in the microwave.
Step 6: After 10 minutes of resting, knead the dough again.
Stretchy Sand Slime
Making slime with this method is as near as you can come to using borax. It’s sticky and pliable. However, it will be granular, much like sand. You’ll need contact lens solution, baking soda, and white school glue. Then, just stick to these steps:
Step 1: Put the glue in a bowl, then add 1 cup.
Step 2: Put in a single tablespoon of baking soda.
Step 3: Three (optional) drops of food coloring.
Step 4: Toss everything together.
Step 5: To the contact lens solution, add 1 tablespoon.
Step 6: Toss everything together.
Add another spoonful of contact lens solution and mix until a smooth consistency is reached.
If the dough seems soft, knead it for a few minutes; this will cause it to firm up as you work with it.
Conclusion
Making and playing with slime is a fun activity for kids of all ages. Squeezing and stretching is quite enjoyable. Many slime recipes, however, call for borax, which is typically used in the laundry. We haven’t had any problems with borax, however others have said that this slime caused them to get burns. Some people wonder if it’s safe for a kid’s toy to contain this substance.
Sensitive skin may also react negatively to it. Most online recipes that claim to be “borax-free” actually still call for the ingredient. After much investigation, I concluded that liquid starch or liquid laundry detergent is a common substitute for borax in recipes.
Borax, also known as sodium tetraborate decahydrate, is an ingredient in a wide variety of starches and detergents, as I discovered after quickly perusing the labels of many different brands. Hope now you know how to make slime without activator.
