Sometimes the Computer goes to an error state and though having an incapability to install the required updates. At this point, Windows Update troubleshooter plays the Key role in fixing the problems automatically. Sometimes, troubleshooter also Get unsuccessful in setting some issues such as the Service Registration is Missing or Corrupt error.

Service Registration is Missing or Corrupt on Windows 10

Service Registration is Missing or Corrupt error also causes the Windows operating system Or the other applications to install the required updates whenever available.

Contents

How to Fix Service Registration is Missing or Corrupt on Windows 10

You have to fix Service Registration is Missing or Corrupt error message yourself manually. We have listed a number of solutions for you to try. Start from the first one and work your way down.

Ways to fix Service Registration is Missing or Corrupt are as follows:-

Solution 1 ⇒ Checking if the Windows update services are up and working

We can try checking if the Windows update services have started and run as regard. This error can also occur if the update services are not doing their tasks and have to be done

Which, in turn, result in the error message. Follow the steps mentioned below:-

Step 1 ⇒ Press Windows + R to launch the Run application. Type “services.msc” and press Enter. It will start the utility of the service, which lists all the running or available services on the Computer.

Step 2 ⇒ Once the new window is opened, search the list and find “Windows Update.” Right-click on the service and select properties.

Step 3 ⇒ Navigate to the General tab. Now in front of the Start-up type option, click on the Dropbox to list all the options available. Select Automatic and press Apply to save changes.

Step 4 ⇒ In the same window, press on Start under the heading of Service status and Press Apply to save changes and Exit the properties window.

Step 5 ⇒ Once you are done modifying the properties of Windows Update service, repeat the same steps for the following:

  • Background Intelligent Transfer Service.
  • Cryptographic Service.

These processes can also be found in the same list where you found Windows Update.

Step 6 ⇒ Now Restart your computer for the changes to take place and make sure you have an active internet connection. Try opening the Windows update again and check if the Service Registration is Missing or Corrupt error message is resolved.

Solution 2 ⇒ Running Instructions Through Command Prompt

If the above method didn’t work for you, you can try running some commands in the command prompt and check if the error still exists. We will try to fix the Service Registration is Missing or Corrupt error by resetting some configurations and settings before moving on to editing the registry or restoring your Windows.

Step 1 ⇒ Press the Window + X to launch the command prompt. You can also press Windows + S and type the command prompt. Then right-click on the first result which comes forth and selects Run as administrator.

Step 2 ⇒ In the command prompt, type the following commands one by one. Don’t forget to press Enter after each command to execute it.

net stop wuauserv

net stop cryptSvc

net stop bits

net stop msiserver

ren C:\Windows\SoftwareDistribution SoftwareDistribution.old

ren C:\Windows\System32\catroot2 catroot2.old

net start wuauserv

net start cryptSvc

net start bits

net start msiserver

Wait patiently for all the processes to execute successfully and complete. Now open Windows update and check if you can successfully run it as expected.

Solution 3 ⇒ Refreshing your NET files

We all know, NET files are present at the core of your computer, and without them, many operations do not work. We can try refreshing these. NET files manually and check if your problems get resolved.

Step 1 ⇒ Press Windows + R to launch the Run application — type “control panel” in the dialogue box and press Enter.

Step 2 ⇒ In the control panel, click on the subheading of programs and features.

Step 3 ⇒ Once you are in the menu, click on “Turn Windows features on or off” present under the subheading of programs and features.

Step 4 ⇒ Now, a list will be populated regarding all the programs and features present on your computer. This might take a while, so ne patient when it is populating.

Step 5 ⇒ Once populated, uncheck all the boxes containing the keyword of “.NET.” This process will uninstall. NET entirely and might require some time. Press Okay to save changes.

Step 6 ⇒ Now open the window again and check all the boxes which you unchecked in the earlier steps. Now your computer will attempt to install the framework. This may require some time to be patient.

Once it is installed, restart your computer for the changes to be implemented and check if the Service Registration is Missing or Corrupt problems get solved.

Solution 4 ⇒ Uninstalling your Antivirus

It is not new that your operating system gets conflicted by your antivirus once in a while. Antivirus contains virus definitions, which is very necessary to be updated every once in a while.

It is possible that your antivirus vendor didn’t update the definitions, which may be causing it to conflict with the Windows Update processes. We can try uninstalling your antivirus and check if Windows Update works finely.

Step 1 ⇒ Start by pressing the Windows + R to launch the Run application. Type “Control panel” in the dialogue box and press Enter.

Step 2 ⇒ In the Control Panel, click on the subheading of Uninstalling a Program present at the bottom left side of the screen.

Step 3 ⇒ Now Windows will list all the programs installed on your Computer. Navigate through them until you find your Antivirus.

Step 4 ⇒ Right-click on it and select the option of uninstalling. After the uninstallation, Restart your computer and check if the problem at hand got solved.

Note: Uninstall your antivirus at your own risk. We recommend not to do plugging or downloading any executables over the internet in the time where your antivirus isn’t installed on your computer. If the Windows update still doesn’t work, you can install your antivirus back again.

Solution 5 ⇒ Running System File Checker

System File Checker (SFC) is a utility present in Microsoft Windows which allows the users to scan their computers for corrupt files in their operating system. This tool has been there in Microsoft Windows since Windows 98. For checking the problem that is due to corrupt files, it is a handy tool as it diagnoses the problem.

We can try running SFC and see if your problem gets solved. You will get one of the three responses when running SFC.

1. Windows didn’t find any integrity violations.

2. Windows Resource Protection found corrupt files and repaired them.

3. Windows Resource protection found corrupt files but was unable to fix some of them.

Follow the steps given below:-

Step 1 ⇒ Press Windows + R to launch the Run application. Type “taskmgr” in the dialogue box and hit enter to start your computer task manager.

Step 2 ⇒ Now click on the file option present at the top left side of the window and select “Run new task” from the list of the options available.

Step 3 ⇒ Now type “PowerShell” in the dialogue box and check the option underneath, which states, “Create this task with the administrative privileges.”

Step 4 ⇒ Once in the Windows PowerShell, type “sfc /scannow” and hit Enter. This process may take some time as the computer is scanning your entire Windows file and being checked for corrupt phases.

Now, If you found any error where Windows say that error has been found but cannot be able to fix then you should type “DISM/Online/clean-up-image/RestoreHealth” in the PowerShell. It will download the corrupt files from the Windows Update servers and replace the corrupt ones.

Note: That this process can also consume some time according to your internet connection. Don’t cancel at any stage and let it run.

If any error was found and was fixed using the above methods, restart your computer and check if the Windows update started working usually.

Solution 6 – Checking your Firewall and Antivirus

We can try disabling your firewall and check if Windows Update usually operates. Windows Firewall monitors your incoming and outgoing internet data and packets.

It also blocks some connections or some applications from installation if they don’t fulfill its criteria. If you haven’t updated Windows for a long time, then there are chances for the occurrence of this problem.

Follow the steps mentioned below to disable the Windows Firewall:-

Step 1 ⇒ Press the Windows + R button to bring up the Run application. Then type “control” the computer’s control panel will get opened.

Step 2 ⇒ At the right top, there will be a dialogue to search. Enter the firewall and then click on the first option, which comes as a result.

Step 3 ⇒ Click on the option “Turn Windows Firewall on or off,” which is on the left side. Through this, you can quickly turn off your firewall off.

Step 4 ⇒ Select the option ‘turn off Windows Firewall’ on both the tabs. Exit after saving the changes.

Step 5 ⇒ Restart the computer and check if the problem still exists.

Solution 7 – Changing some Registry Values

We can also fix this problem by removing certain values from the registry. But before going for this method, you should make a backup of your registry. Windows registry editor is a powerful tool and requires intense care when carrying out changes. Follow the guide carefully and don’t change the values if you don’t have any knowledge about them.

Follow the steps given below:

Step 1 ⇒ Press Windows + R to launch the Run application. Type ‘regedit‘ and press enter. It will open the registry editor.

Step 2 ⇒ Go through the following file path using the left navigation pane:

HKEY_LOCAL_MACHINE\SOFT\Microsoft\WindowsSelfHost\Applicability

Step 3 ⇒ Now find ThresholdOptedIn value on the right side of the screen. Right-click on it and select delete.

Step 4 ⇒ Restart the computer and check if the issue is resolved.

Some of the users report that they had a recovery from the folder present inside the Applicability folder. Delete the recovery from the folder, and the issue will be resolved quickly.

In another case, it might be possible that the Applicability key doesn’t have any other value besides the Default value. In this situation, follow the steps mentioned below:

Step 1 ⇒ Go to the following file path using the left navigation pane:

HKEY_LOCAL_MACHINE\SOFT\Microsoft\WindowsSelfHost\Applicability

Step 2 ⇒ Select New ⇒ String by making a right-click on the space.

Step 3 ⇒ Enter a name for the new string as “Branchname.” After creating a unique string, double click it, and type “fbl_impressive” in the Value data box.

Step 4 ⇒ Press OK, and save changes.

Step 5 ⇒ Now create a new string just like the first one and name it as “Ring” and set the value data as “Low.” Press OK to save changes.

Step 6 ⇒ Exit the Registry Editor and restart the computer to see if the issue has resolved.

Solution 8 ⇒ Creating a Local Account

This problem can also occur due to some problem in your profile or when the administrator hasn’t granted you access. If you are the owner of the computer and still cannot access the computer, we can also try by making a new local and check if this works.

Step 1 ⇒ Open the administrator account. Type settings in the start menu and click on accounts.

Step 2 ⇒ Now select “Family and other users” options present at the left side of the window.

Step 3 ⇒ Once inside, select the menu, select “Add someone else to this PC“.

Step 4 ⇒ Now the window will guide you on how to create an account. When the new window appears, click “I don’t have this person’s sign-in information.”

Step 5 ⇒ Now go for the option “Add a user without Microsoft.” Now Windows will prompt you to make a new Microsoft account display.

Step 6 ⇒ Enter all the details and choose a password that you can remember.

Step 7 ⇒ Now go to Settings ⇒ Accounts ⇒ Your Account.

Step 8 ⇒ Beneath your account picture, you will find an option “Sign in with your local account instead.

Step 9 ⇒ Enter your current password when the prompt appears and click on Next.

Step 10 ⇒ Enter the Username and Password for your local account and click on “Sign out and finish.”

Step 11 ⇒ Now you can easily switch to a local account and move all your personal files to it.

Step 12 ⇒ Go to Settings ⇒ Accounts ⇒ Your Accounts and select the option “Sign in with a Microsoft Account instead.”

Step 13 ⇒ Enter user name and password and click Sign in.

Step 14 ⇒ Check if the Service Registration is Missing or Corrupt error still prevails, and Windows Update is working on this account.

Solution 9 – Problem with Wireless Connectivity

It has been publically acknowledged by Microsoft that there is a slow WiFi issue in their products. Many users have reported that web pages do not load as expected, and the browsing is very slow. If you are experiencing these problems, it means the error is due to connectivity.

It can be resolved by changing some Registry values as stated by Microsoft and check if the problems get solved. Follow the steps mentioned below:

Step 1 ⇒ Press Windows + R to launch the Run application. Type ‘regedit‘ and press Enter. It will open the registry editor.

Step 2 ⇒ Go through the following file path using the left navigation pane:

HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\mrvlpcie8897

Step 3 ⇒ Locate the item named “TXAMSDU” on the right side of the screen. Double-click it to change its value from 1 to 0.

Step 4 ⇒ Press OK to save changes and exit. Restart your computer and check if Service Registration is Missing or Corrupt the error has gone.

Read Next:

Conclusion

Service Registration is Missing or Corrupt error can make many problems on your Windows 10 PC, but as you can see, this error can be fixed by using one of the given solutions.