There are few router manufacturers as good as TP-link. What it means to log in to your router is “router login”. After logging in, you can access a wide range of router functions. In the router, TP-Link provides numerous capabilities, including security, access control, and more.


What’s The Point of Using a Password To Log Into My Router?

In order to utilise the internet, you must configure your IP and DNS addresses when setting up a new connection.

Control of access: After logging into your router, you can configure your own controls. It is possible to see and remove other users from the router.


Your router can be configured to block certain devices from connecting to it. Your router’s username and password are both changeable (WiFi). You can also limit how much time you spend on the internet.

Usage and Speed: You can see how fast the connection is by running a speed test ( internet). You may also see how much data is being used by a certain device. You have complete control over which devices can access the internet.

Set up a new line of communication: When you need to set up a new connection, you’ll need to log into your router and provide information about IP addresses and DNS addresses.

TP-Link Router Login Instructions

Two methods exist for gaining access to your router.

First Approach

Your router (WiFi) must be plugged into a computer or smartphone in order for this method to work. To log in, simply follow the instructions outlined in the following section.

Step 1: The first step is to open a web browser on your computer or smartphone (Chrome or Firefox).

Tip 2: Type or into the address bar (depending on your router’s model) and press Enter.

Step 2: You’ll be led to a login page at this point. Enter admin as the username and password in the respective text boxes.

It’s done. You’ve successfully logged into your router’s web interface.

Approach 2

A PPPoE connection will be established using this method. LAN devices are connected by PPPoE, or point-to-point protocol over Ethernet (LAN). Simply follow the instructions below to set up PPPoE connections.

Step 1: In the first step, use an Ethernet wire to connect your computer and router. should now appear in the address bar of your web browser.

Step 2: To get to the router control page, go to the “Network” option. After that, click on WAN and select PPPoE as the connection type.

Step 3: Log in using the provided credentials (admin is the username and password is the password). Reboot your router after saving the changes in step six.

The PPPoE connection has been successfully set up by you. Congratulations.

Read Also:

  4. Cisco Router Login
  5. Netgear AC1600 Setup


I hope you’ve learnt how to log into the TP-Link router by the end of this post. Logging into your router gives you access to a plethora of options.