Roku is one of the most well-liked media players now available since it consistently delivers positive user experiences.

Despite the positive comments, some users have reported seeing the Roku Error 014.30 on their screen due to shaky wireless connectivity. When trying to stream your favourite TV or movie, this error sometimes arises because of a slow or nonexistent internet connection.

Furthermore, this can occur if you try to access your Roku account with an incorrect username or password. This could also point to a faulty TV’s launch setup, or a DNS cache corruption on the router.

Roku Error 014.30

How to Resolve Roku Error 014.30?

While streaming on a Roku TCL TV, you may see the “Roku Error 014.30” error, which is typically caused by a poor wireless connection or slow internet rates.

This could be due to a problem with the TV’s launch parameters or a stale DNS cache on the network.

Fix 1: Check Your Internet Connection

The first and most important step is to ensure that your Internet connection is stable, as this is the cause of the Roku Error 014.30.

Either try another device or go closer to the Wi-Fi access points to see if that improves performance.

Follow these steps to restart your modem and router if you experience sporadic Internet access.

Step 1: Disconnect everything from your modem and router.

Step 2: Give your gadget a chance to cool down for at least 30 seconds.

Step 3: If your modem still won’t turn on after being plugged back in, try pressing the Power button.

Step 4: After waiting the recommended 60 seconds, plug your router back in. The router you’re using may need its power turned on.

Step 5: After 5 minutes, your router should be ready to use.

You should then see if your Internet connection speeds up again.

Fix 2: Check Your Network Password

If you’re getting good results from your network, you might want to double-check that your password is entered correctly.

Step 1: First, navigate to the main menu by pressing the Home button on your Roku remote. From there, select Settings.

Step 2: Select Network, followed by Setup connection, and finally Wireless.

Step 3: Select the network for which you wish to verify the accuracy of the entered password.

Fix 3: Power-Cycle Devices

If corrupt DNS cache has built up inside your router, rebooting your router and TV should fix the problem.

Step 1: Disconnect the TV from the wall.

Step 2: Discharge the stored energy by pressing and holding the TV’s Power button for at least 20 seconds.

Step 3: Plug your electronics back in and power them back up.

Once your Roku has restarted, you may see if the Roku Error 014.30 has been fixed.

Fix 4: System Restart Your Roku

Step 1: Enter Roku’s configuration menu.

Step 2: Select System and then Restart the System.

Step 3: You can see if the Roku Internet problem has been fixed after some time has passed.

Fix 4: Perform Factory Reset

If none of the above solutions work, you can try erasing everything off your Roku and starting over.

Step 1: Select System from the Settings menu on your Roku player.

Step 2: Select “Advanced system options,” followed by “Factory Reset,” from the menu.

Step 3: Select Factory reset everything, enter the code displayed, and then select OK.

After that, the reset will begin, and you’ll be able to power on your TV and re-establish your internet connection. To see if Roku Error 014.30 remains, you should check it again.

Conclusion

The “can’t connect to your wireless network” message box is sometimes displayed in tandem with Roku Error 014.30.

It’s likely that your Internet connection isn’t very strong or that you don’t have any Internet access at all if you receive this error.

Some users have speculated that Roku Error 014.30 is not caused by a problem with the network itself, but rather by incorrectly setup devices.